LG washing machines are packed with advanced sensors that detect issues before they cause major damage. When something goes wrong, you'll see an error code on the display. Here is a breakdown of the most common LG washer error codes and how to resolve them.
Common LG Washer Error Codes
OE - Outbound Error (Drain Issue)
Meaning: The washer is unable to drain the water from the tub. How to fix: Check the drain hose for kinks. Next, access the drain pump filter (usually at the bottom front) and clean out any lint, coins, or debris. Make sure the drain hose isn't pushed too far down the standpipe.
UE or uE - Unbalanced Error
Meaning: The load is unbalanced, preventing the machine from spinning safely. How to fix: Open the door and redistribute the clothing evenly. If washing a single heavy item (like a blanket or rug), add a few smaller items to balance the weight. Ensure the washing machine is perfectly level on the floor.
dE, dE1, dE2 - Door Error
Meaning: The door is not properly closed or locked. How to fix: Open the door and check for any clothing caught in the seal. Push the door firmly until you hear it click. If the code persists, the door latch or switch may need to be replaced.
IE - Inlet Error
Meaning: The washer is not filling with water quickly enough. How to fix: Ensure both the hot and cold water taps are fully open. Check the inlet hoses for kinks and clean the small mesh filters where the hoses connect to the washer.
tE - Temperature Error
Meaning: There is an issue with the water temperature sensor (thermistor). How to fix: Unplug the washer for 5 minutes to reset the control board. If the error returns, the thermistor or the wiring connected to it requires professional repair.
LE - Locked Motor Error
Meaning: The motor is overloaded or the tub cannot spin. How to fix: This can happen if you overload the washer. Remove some items and try again. It can also indicate a failed rotor position sensor (hall sensor) or a damaged motor, which requires an appliance technician.
Need Help With Your LG Washer?
If an error code persists after basic troubleshooting, don't ignore it. Operating a malfunctioning washer can lead to water damage or costly secondary repairs. Contact Appliance Service Plus for expert diagnostics and repair in Toronto and the GTA.
Need Professional Help?
If the problem persists or seems too complex to handle on your own, our expert technicians are ready to help. Fast, reliable service when you need it.
